If your jewelry was not bought from them, you may have to pay extra money for the jewelry cleaning.
Ultrasonic cleaner will be the best way to clean the jewelry for you. With your own ultrasonic cleaner, you can clean your jewelry the same way the professionals do it.
This method can save money and time, is very easy to use, and is safe environmentally.
Read this article to learn more about how to clean your jewelry at home with an ultrasonic cleaner.
Making a Solution
Fill the tank of your cleaner with water, adding a tablespoon of ammonia. Don't use too much because it can be harmful.
Add some dishwashing liquid, and you are done.
Turn on the cleaner and let it run without any items for 5-10 minutes so that the solution gets mixed well.
Setting up for Cleaning
Put your item(s) into the tank. Remember not to put in too many pieces at once or it may scratch your jewelry.
Heat the solution and set temperatures you need. To work best, it needs to heat the solution. There are many ultrasonic cleaners that have a built-in heater to ensure that the solution is heated up. They differ in price. Just heat the water up before you put it in the tank. Do not bring the water to a boil. Mix in the ammonia and the dishwashing liquid Set the temperatures you need.
Running the Device
Turn the device on. Let it run for as long as needed until your jewelry is clean. Depending on how dirty the items are, this time usually varies from 1 to 20 minutes
When the cleaning is done, switch the cleaner off. Leave your jewelry inside for another 5-10 minutes so that the dirt particles can fall to the bottom of the tank.
Take your jewelry out and clean it briefly with a soft brush. Make sure that any residual dirt is removed, especially from the mountings of your rings.
Rinse the items. Wash off any remaining detergent, and dry them with a soft cloth.
Comments
0 comment