How to Make Your Own Garden Table

MediaQuest

Editor

posted on 10 years ago — updated on 1 second ago

34
views

Everybody needs a garden table, especially for those wonderful days of spring and summer. Whether you are a woodworker, enjoy working on DIY projects, or you just want to save money, this article is for you. Here are detailed instructions on how to make your own garden table. You can always buy a garden table, but nothing beats the pride and enjoyment in your own work.

Steps

Preparing the Materials

Gather all the tools and materials. For this project, you'll need the items listed below in "Things You'll Need".

Make all the cuts to the planks as follows: 2 pieces 82 cm (32,3 inches) long of 2,5 x 10 cm (1×4 inches) plank 4 pieces 177 cm (69,7 inches) long of 2,5 x 10 cm (1×4 inches) plank 2 pieces 168 cm (66,1 inches) long of 2,5 x 10 cm (1×4 inches) plank 17 pieces 92 cm (36,2 inches) long of 2,5 x 10 cm (1×4 inches) plank 4 pieces 74 cm (29,1 inches) long of 5 x 10 cm (2×4 inches) plank

Start sanding. Use a sander to smooth all the previously cut pieces.

Making the Frame

Start with the assembly of the table as shown in the picture above. Use a clamp when assembling every piece and make sure that all the joints are at 90 degree angles.

Drill a hole one or two sizes smaller than the screw. Then put the screw through that hole. That ensures the screw will get where you wanted it to go. Do not try to put the screw in if you haven't drilled the hole first.

After the frame is completed, you need to put two 168 cm (66.1 inches) planks on the left and the right side of the frame, as shown in the picture above. The planks enhance the stability of the legs and add to the visual appearance of the table.

Adding the Plate

Choose the plate planks. Now it's time to put the plate of the table on the frame. For the plate of the table you will use 92 cm (36.2 inches) planks.

Attach the planks. Every plank must be screwed down on four places; that means on every plank of the frame. This is important because it is very hard to acquire completely dry wood and if you don’t tighten it down, it will bend and your table will be ruined. On the picture you can see how to assemble the plate on the frame. Leave 1 cm (1/3 of an inch) space between every plank on the plate, for visual appearance.