How to Improve the Efficiency of a Dehumidifier
How to Improve the Efficiency of a Dehumidifier
The performance and efficiency of a dehumidifier can be crucial to keeping your home or office comfortable, especially in moist, humid climates. Using a dehumidifier can also prevent mold or mildew from growing in your living space. If your dehumidifier fails to work properly or efficiently, your home can sustain damages as a result; however, there are preventive steps you can take to maintain and improve the efficiency of a dehumidifier. Continue reading this article to learn more about these steps.
Steps

Close all doors and windows in the location where you run your dehumidifier. This will prevent your dehumidifier from running constantly throughout the day and night, which can potentially decrease the lifespan of your dehumidifier.

Place the dehumidifier in an area where air can circulate efficiently through the appliance. If you place the dehumidifier against a wall or large piece of furniture, the dehumidifier may have to work harder in order to function effectively. Verify that your dehumidifier sits in an area with at least 12 inches (30.48 cm) of free space around each of its air vents to allow for proper air circulation.

Run your dehumidifier only when humidity levels are higher than 50 percent. When you run your dehumidifier at any other time, your appliance will most likely run continuously and have very little impact on the overall air quality of your living space. Monitor humidity levels by reviewing the humidistat built into your dehumidifier, or by purchasing a separate humidistat reader for your home or office.

Replace the filter on your dehumidifier or clean it at least once per year. This can prevent any dust, mold, or mildew from collecting or growing on the filter, which can decrease the overall efficiency of the dehumidifier. Consult the user manual or with the manufacturer of your dehumidifier to determine the exact steps for replacing the filter or performing filter maintenance.

Clean the dehumidifier coils once per year. The air that passes through the coils will often contain dust and fungal spores that affect the performance of your dehumidifier. Turn off your dehumidifier, then unplug it from the electrical outlet. Use a vacuum attachment to remove dust from the coils, or mist the coils with water from a spray bottle, then wipe the coils down using a soft cloth.

Check the dehumidifier coils for frost in cooler temperatures. In temperatures below 65 degrees Fahrenheit (18.33 degrees Celsius), frost can sometimes build up on the coils. If frost is left undetected or remedied, the efficiency of your dehumidifier will significantly decrease. Turn the dehumidifier completely off if frost exists on the coils, then wait for the ice to melt and for the room temperature to increase before using the dehumidifier again.

Clean the water container of your dehumidifier as often as needed. The water collected from the air will often become moldy or stale, and can negatively affect the efficiency of your dehumidifier. Use a mixture of distilled white vinegar and water or a mixture of citric acid and water to clean humidifier parts.

Wait at least 10 minutes to turn your dehumidifier back on after it has been turned off. This will allow the pressure in the appliance to equalize fully, which can result in the prolonged life of your dehumidifier.

What's your reaction?

Comments

https://wapozavr.com/assets/images/user-avatar-s.jpg

0 comment

Write the first comment for this!